R8/17C PR+ - R40/17 PR+
Like us on Facenook
It's that easy
01283 536700
R8/17C PR+ - R40/17 PR+
R8/17C PR+ - R40/17 PR+
Click to enlarge

  • Quiet, smooth operation
  • For use with or without anti-lifting device
  • Easy setting of final positions - no installation set required
  • Obstacle detection in the downward direction when rigid shaft connections are used.
  • Blockage detection in the up direction
  • Automatic shutter length adjustment
  • Smooth upper stop
  • Dynamic torque adjustment
  • Increased downward pressure when used with anti-lifting devices
  • Parallel connection permissable
Technical data
Driving torque 8 - 40Nm
Output speed 17rpm
Limit switch range 64 revolutions
Nominal voltage 230V AC
Type of operation S24 min
Protection rating IP44
Connection cable C Plug

Automatic shutter length adjustment in systems featuring buffers - Identical appearance when shutters are open. No change in position due to temperature expansion etc

Suitable for left and right hand installations - No extra storage space required due to different types of drives

No fixed buffers required for operation - Suitable for roller shutters with or without buffers

Suitable for rollers shutters with or without anti lifting device

Automatic anti-lift device detection - Roller shutter is pushed down to prvent break in

Blockage detection in the UP direction - Roller shutter is protected against overload i.e. freezing

Parallel connection possible without relays - No additional cost for group controls or separation relays

Easy setting of final positions - No special installation set required to set final positions

Soft upper stop- Less loading on the shutter thanks to dynamic torque adjustment

Shutter can be would up around the motor head - Suitable for applications with limited space

Item number Name Nominal
Power con-
2010 120 122 0

R8/17C PR+

0.5 100
2010 120 123 0 R12/17C PR+ 0.53 110
2020 120 111 0 R20/17C PR+ 0.77 160
2030 120 109 0 R30/17C PR+ 0.96 205
2040 120 008 0 R40/17C PR+ 1.18 230

This product was added to our catalog on Friday 23 September, 2011.
Web Design by DevMac Systems